USER MANUAL – MODELS 6002NA/V1/V2/ & 7002xx
QUESTIONS? EMAIL US AT [email protected] OR CALL 401-404-5250
WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE!
Revision 1.6 www.bedjet.com P a g e | 12
BedJet Dual Zone Switch
The BedJet Dual Zone switch sets the maximum
allowable air flow and power utilized by the
BedJet in any heat mode. In Turbo Heat Mode,
the BedJet can consume a large amount of
power for an electrical appliance, up to 1440
watts.
Any installation with two BedJet devices on the
same household AC branch circuit or two
BedJets on the same bed must have the Dual
Zone Switch set ON to LOW Power 800W, in order not to exceed AC circuit Amp capacity.
The
Dual Mode ON Low Power setting reduces the available airflow and heating power by
approximately 50% in the Turbo heat mode, and 20% in regular heat mode in order that two
BedJet’s being used simultaneously on the same AC bedroom circuit will not exceed AC circuit
capacity. This is still plenty of power to warm the bed quickly.
Installations where only one BedJet is used on the same household branch AC Circuit and one
BedJet device is installed on the bed should set the Dual Zone Switch OFF to HIGH power 1500W
to enjoy the full power heating comfort of the system.
Users with single or twin size beds
should set the Dual Zone Switch to LOW Power.
WARNING:
Failure to comply with the correct Dual Zone Switch setting with more
than one BedJet installed on the same AC branch circuit may result in overloaded electrical
circuit, electrical hazard or personal injury. Never use more than one BedJet on the same
household AC circuit or same bed without setting Dual Zone switch to LOW Power.
