USER MANUAL – MODELS 6002NA/V1/V2/ & 7002xx
QUESTIONS? EMAIL US AT [email protected] OR CALL 401-404-5250
WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE!
Revision 1.6 www.bedjet.com P a g e | 18
BedJet Operating Modes
Note: Basic operating functions are supported by the standard wireless remote
control. Utilize the Bluetooth linked BedJet App from your smartphone or tablet
computer to unlock advanced features.
The BedJet main power switch (under the power cord) must be turned ON for the remote
control to function. Once the power switch is ON, the BedJet will beep once to indicate
successful boot-up of the internal microcontroller. The BedJet is now in standby mode.
Activate the BedJet by pressing the desired Turbo, Heat or Cool mode button on
the remote once. A single beep confirms an ON command.
Deactivate BedJet into standby by pressing the same mode button a second time. A double
beep confirms a mode OFF command.
While active in any given cooling/heating mode, pressing a different mode button will switch
cooling/heating modes without shutoff of the BedJet. The BedJet will beep once to indicate
the mode change. Please note when changing from heating to cooling mode it will take some
number of minutes for the air exhaust temperature to become cool.
Adjust the Air Flow using the “+” or “-“buttons on the remote to increase or decrease the Air
Flow to the bed. More Air Flow means more heating/cooling, less Air Flow means less
heating/cooling power. The BedJet will beep once for each increase/decrease. Each
increase/decrease increments 5% of allowable Air Flow range for each mode, thus pressing 20
times gets you from full power to lowest power for any given mode. Press and hold the
buttons for rapid increase or decrease.
Press the Auto-Shutoff Timer Advance button to increase the time left on the
Auto-Shutoff function above the default time settings (see table below).
Press the Mute button on remote control to silence all beeps. Press again to
reactivate beep acknowledgement of remote commands.
