User manual | EMS-8x-WC | Beckmann GmbH
7 Electronic coin validator (only EMS-82)
The electronic coin validator is programmed to specified coins in different tolerances. Each of these
coins can be locked separately by setting a lock switch. Lock switch to ON (up) disables the
corresponding channel, lock switch to OFF (down) activates the corresponding channel.
Normal-Validation
Coins are analyzed in normal tolerance ranges. This is the default factory
setting.
Strict-Validation
Coins are analyzed in strict tolerance ranges. Improved detection of
counterfeits. The acceptance of the set coin type has been slightly
decreasing. The lock switch "normal" must be set to ON.
Very strict Validation
Coins are analyzed in very strict tolerance ranges. Improved detection of
counterfeit coins. The acceptance of the coin type continues to decline.
The lock switch "normal" and "strict" must be set to ON.
Blocking switch
If the coin should not be accepted at all, all validation channels for this
coin must be blocked.
Page 14
