User manual | EMS-8x-WC | Beckmann GmbH
4 Operation
The following description refers to factory default programming of the EMS-8x.
The EMS-8x has a 3-digit LED-Display, that shows the customer the current state of the device. A
survey you can find in the following figure.
At the beginning of a payment transaction, the unit must be free, ie the display must show the
minimum insertion. After inserting a coin EMS-8x-Door shows the remaining balance if the
minimum insertion has not yet been reached.
If the minimum insert is reached, the display stops flashing, it will show "Opn" in the display and
the door opening signal is triggered. When the door is closed and a door contact is used the
display will show „Occ“ (Occupied). After opening the door contact the unit is free and the
minimum insert is displayed. Occ“ (Occupied) is also displayed when no amount has been inserted
and the door contact is closed.
If there is no door contact connected, the "Opn" (Open) message is displayed until the deposited
amount for the time has expired.
Page 8
Display shows minimum insertion:
The connected device is free. Coins can be inserted.
Display shows balance and is flashing:
Coins have been inserted but the minimum insertion has not be reached
yet. Further coins must be inserted.
Display shows “Opn” (Open):
The minimum insertion has been reached and the door is opened.
Display shows “Occ” (Occupied):
As long as the door is locked the display shows “Occ” = Occupied (only
available if a door contact is used).
Figure 4:
Overview display
