Beckman Coulter BiomekFX, Быстрый старт

Страница: 55 / 60

3-14 Using the Editors While Creating Methods
Beckman Coulter, Inc.
3.6 Manually Controlling the Pod
If you need to manually control the Biomek FX instrument, including moving the
bridge, head, and gripper, outside of a method, you’ll use
Manual Control
.
Manual
Control
is also used to control the pod when framing the deck or gripper and when
recovering from errors. Refer to the
Biomek® FX and FX-P Laboratory Automation
Workstations User’s Manual,
Chapter 6,
Manually Controlling the Biomek® FX in
Biomek Software
, for additional information.
Note:
Manual Control
is used also for controlling individual ALPs and Device
Controller outside a method (refer to the ALPs User’s Manual ).
Using the following instructions, you’ll use
Manual Control
to move the pod to a
different position on the deck. You’ll move the pod to the Z-max height first to make
sure you don’t hit anything on the deck and then you’ll move the pod to a selected
position.
Note: If you launch the simulator, you can watch the pod move as you complete the
following steps.
To move the pod(s) using
Manual Control
:
1. Choose Instrument>Manual Control .
Manual Control
appears (Figure 3-
16). Here is where you can choose to which position you want to move a pod.
Figure 3-16. Manual Control
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com