Beckman Coulter BiomekFX, Быстрый старт

Страница: 20 / 60

Learning to Create Methods for the Biomek® FX 2-5
Biomek® FX and FX-P Laboratory Automation Workstations Quick-Start Guide
To configure the
Instrument Setup
step for your new method:
CAUTION: Do not place labware other than a tip box on a tip loader
position (TL#).
1. In
Deck
, make sure the default deck layout (Deck1) is selected. The
Instrument
Setup
step uses a deck layout as a map for the placement of labware, ALPs, and
external hardware devices, such as stacker carousels.
2. Drag and drop the following labware on the Deck Layout Display:
• an AP96_200uL to
TL1
• a Reservoir to
P4
• a BCFlat96 to
P5
• an AP96_200uL_LLS to
P16
; the LLS
means these are conductive tips that enable
liquid level sensing
on a Span-8 Pod.
• a Costar384FlatSquare to
P12
. Your
screen should look like Figure 2-3.
Note: To remove unwanted labware from the Deck
Layout Display during setup, drag and drop the
labware to the
Clear (trash) icon.
Figure 2-3. Instrument Setup step with labware added
If you want to use a
labware type that does
not appear in the
available labware list, use
the
Labware Type
Editor
to create a new
labware type. In Section
3.3,
Creating New
Labware in the Labware
Type Editor
, you will
create a new labware type
in the
Labware Type
Editor
.
Creating Labware
Liquid Level Sensing
Liquid Level Sensing
(LLS) is used to
determine the liquid
level within a piece of
labware using specially
designed LLS tips. Refer
to the
Biomek® FX and
FX-P Laboratory
Automation
Workstations User’s
Manual,
Chapter 3.3.1,
Drag the desired
labware graphic to
the desired position
on the Deck Layout
Display.
Deck Layout
Display
From the Deck Layout
Display, double-click
the labware graphic to
display
Labware
Properties
.
AP96_200uL
on
TL1
BCFlat96
on
P5
Reservoir
on
P4
AP96_20uL_LLS
on
P16
CostarFlat384
on
P12
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com