Beckman Coulter BiomekFX, Быстрый старт

Страница: 29 / 60

2-14 Learning to Create Methods for the Biomek® FX
Beckman Coulter, Inc.
2.5.2 Configuring Tip Handling
When you are using disposable tips on the Span-8 Pod, some changes need to be
made to the
Tip Handling
configuration; when you are using fixed tips, see note
below.
Note: When you are using fixed tips, you will use the default
Tip Handling
settings
and do not need to make any changes in
Tip Handling
. Complete only step 6 of this
section and continue with Section 2.5.3,
Configuring Source Labware
.
To configure tip handling using disposable tips:
1. Make sure a Span-8 Pod is selected in
Use pod
. If your instrument has two pods,
the left pod is Pod1 and the right pod is Pod2 .
2. In
Tip Handling
, make sure Load is checked
3. Click on the AP96_20 μ L_LLS tip box in the Current Deck Display to load LLS
tips as part of the
Combine
step.
4. Make sure unload them is selected in the next field.
5. Check Change tips between transfers .
6. Your tips are configured for your liquid transfer, so click the up arrow next to
Tip Handling
to collapse the configuration. This allows more room for the step
configuration (Figure 2-12).
Figure 2-12. Combine step with Tip Handling collapsed
Configuring
Tip
Handling
is not always
required because the
Biomek FX locates and
loads clean tips
automatically during a
Combine
step. Refer to
the
Biomek Software
User’s Manual,
Chapter
16.3.1,
Configuring Tip
Handling
, for more
information on other tip
handling options, such as
Wash tips in
and
Wash
tips with
.
Tip Handling
Use this arrow
to collapse
and expand
Tip Handling.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com