manualshive.com logo in svg

Beckman Coulter BiomekFX, Быстрый старт

Поделиться
Скачать
Beckman Coulter BiomekFX Скачать руководство пользователя страница 11

1-4

Introducing the Biomek® FX Laboratory Automation Workstation

Beckman Coulter, Inc.

1.2.1

Pods and Heads

There are two types of pods available for the Biomek FX:

•

Multichannel Pod — holds various removable 
and interchangeable heads, such as the 96-
Channel 200 

μ

L Head, that perform liquid-

handling operations, and a gripper for labware 
movement operations.

Note:

Refer to the 

Biomek® FX and FX-P 

Laboratory Automation Workstations User’s 
Manual, 

Chapter 2, 

Multichannel Pod

, for 

detailed information on the Multichannel Pod 
and interchangeable heads.

•

Span-8 Pod — holds a series of eight probes 
that perform liquid-handling operations 
independent of each other. 

Note:

Refer to the 

Biomek® FX and FX-P 

Laboratory Automation Workstations User’s 
Manual, 

Chapter 3, 

Span-8 Pod

, for detailed 

information on the Span-8 Pod.

1.2.2

Automated Labware 
Positioners (ALPs)

Automated Labware Positioners (ALPs) are removable and interchangeable platform 
structures that are installed on the Biomek FX deck to allow automated assays to be 

performed.

ALPs are either active or passive:

•

Passive ALPs

 hold labware in place on the deck or act as receptacles for 

by-products from methods, such as system fluid and disposed tips, tip boxes, 
and labware.

•

Active ALPs

 contain mechanisms that may use power and/or air sources for 

mechanical operation, such as tip loading, tip washing, mixing/stirring, 
shaking, and precisely positioning labware.

Note:  

Refer to the 

ALPs User’s Manual

 for detailed information on the ALPs on 

your system.

Heads

Interchangeable heads 
aspirate and dispense 
liquid using disposable 
tips. The tip 
compatibility and the 
maximum volume that 
may be aspirated and 
dispensed with those tips 
varies for each head.

Probes

Probes move and pipette 
independently in the D-
and Z- axes and hold the 
interface for fixed or 
disposable tips, both 
Liquid Level Sensing 
(LLS) capable and non-
LLS capable, used to 
perform liquid-handling 
operations.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание BiomekFX





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды