Beckman Coulter Avanti JXN-26, Руководство пользователя

Страница: 68 / 210

PN B38322AA 4-2
Configuration
Managing Your Network
5
DHCP Mode
(Dynamic Host Configuration Protocol) is enabled by default and automatically
configures the IP addressing parameters using a DHCP Server on the network.
If your network administrator provides a specific IP address, disable DHCP mode and enter the
values provided for the following fields:
•
IP Address
•
Subnet Mask
•
Default Gateway
•
DNS Server
To disable DHCP Mode, select
Enable
so that the green square is cleared.
6
Select
Save
to save the network information and return to the
System Options
page.
Selecting a Printer
Use this option to select a USB or network printer for the instrument. The system automatically
sends all print requests to the selected printer.
NOTE
Printer drivers must be installed by your Beckman Coulter Representative.
1
Select the
Menu
Button on the Header Bar to display the
Menu
page.
2
Select
Options
to display the
System Options
page.
3
Select the
Network
Tab, then select
Select Printer
to display the
Select Printer
page, which lists
the available printers.
4
Select a printer from the list. You can select
Test Print
to send a test page to the printer.
5
Select
Save
to save the printer selection and return to the
System Options
page.
Setting Up Email
Use this option to configure email that can be sent from the instrument. The instrument will send
diagnostic notifications to the email account of all users with an email address entered in their user
profile.