3-12
Operation
Action
Result
1. Press [
PROGRAM
].
Previously saved program numbers in use are displayed.
2. Select the appropriate keypad
number and press [
ENTER
].
The message “Press [
ENTER
] [
START
] to run, or edit parameters” is
displayed.
3. Press [
SHOW SET
] to display
program parameters.
4. To begin the run, press
[
ENTER
] and [
START
].
The run starts.
Changing a Program
Action
Result
1. Press [
PROGRAM
].
Previously saved program numbers are displayed.
2. Select the appropriate keypad
number and press [
ENTER
].
The message “Press [
ENTER
] [
START
] to run, or edit parameters” is
displayed.
3. Press [
SHOW SET
] to display
program parameters.
4. Press the run parameter key
to be changed.
Parameter prompts are displayed.
5. Use the keypad to enter the
new value.
6. Repeat steps 4 and 5 to
change other run parameters.
When all changes have been
entered, press [
SAVE
].
The revised program will remain in memory until further changes
are made and saved. Record the changes on your Program Library
record (233679).
7. Press [
ENTER
] and [
START
] to
begin the programmed run
(or press [
PROGRAM
] to exit
program mode and return to
manual operation).
The run starts.
