3-5
Operation
Action
Result
5. Close the chamber door and
press [
DOOR
]. (To keep the
chamber clean and dry, leave
the door closed whenever
possible.)
The door latches. When the latches engage, the LED next to the
[
DOOR
] key lights.
MANUAL OPERATION
• When a run-parameter key ([
ROTOR
], [
RPM/RCF
], [
TIME
], [
TEMP
],
[
ACCEL
], or [
DECEL
]) is pressed, a parameter can be entered or
changed. Entry is completed when [
ENTER
] or another function
key is pressed.
• To change an entry before you’ve pressed [
ENTER
] or another
parameter key, press [
CE
] and enter a different value. To change
an entry after you’ve pressed [
ENTER
], press the run-parameter
key again.
• If an unacceptable value is entered, the valid range for that param-
eter is displayed in the message line. Enter the correct value.
SELECTING A ROTOR
Action
Result
1. Press [
ROTOR
].
A list of rotors, with rotor entry codes, scrolls across the display.
2. Use the keypad to select a
rotor by entry code number.
➠
NOTE
An alternate method of selecting a rotor is to
press [
ROTOR
] repeatedly; the rotor number
changes each time the key is pressed. When the
rotor you are using is displayed, press [
ENTER
].
3. Press the next run-parameter
key or press [
ENTER
].
