3-10
Operation
CREATING A NEW PROGRAM
Action
Result
1. Press [
PROGRAM
].
Previously saved program numbers are displayed.
2. Use the keypad to select a
program number that is not in
use or one that you want to
overwrite and press [
ENTER
].
The message “Press [
ENTER
] [
START
] to run, or edit parameters” is
displayed.
3. Enter run parameters (speed,
time, temperature, accelera-
tion/deceleration rate
settings).
If you entered an unacceptable parameter, an error message will be
displayed. (Press [
CE
] and enter an acceptable value, then press the
next run-parameter key.)
4. When all parameters are
entered, press [
SAVE
].
The program is saved into memory.
➠
NOTE
Record the program parameters on the
Program Library record (233679).
5. Press [
ENTER
] [
START
] to
run the programmed run
(or press [
PROGRAM
] to exit
program mode and return to
manual operation).
STARTING A PROGRAMMED RUN
Action
Result
1. Press [
PROGRAM
].
Previously saved program numbers are displayed.
2. Use the keypad to enter the
number of the program, then
press [
ENTER
].
The message “Press [
ENTER
] [
START
] to run, or edit parameters” is
displayed.
