Beckman Coulter AU5800 Скачать руководство пользователя страница 76

Страница: 76 / 174

B00418AA

4-10

Processing Samples

4.3 Place a Set Tray on the Analyzer

Two trays can be placed on the rack set unit, and two trays can be placed on the
rack collection unit.

4.3.1 Place Trays

Confirm that the orange LED on the rack set unit and rack collection
unit are not blinking.

WARNING

Before removing the tray from the system during operation, confirm
that the orange LED is off. If the tray is removed while the orange
LED is lit, an injury may result or the rack may topple over.

For details of LED functions, refer to 3.4.3 LEDs and Operation
Buttons (Rack Feeder Unit) in the AU5800 User's Guide, chapter 3.

Figure 4.4

Rack collection unit Orange LED

Rack set unit 1 Orange LED

Rack set unit 2 Orange LED

B00418AA_AU5800 QRG_EN.book Page 10 Monday, December 13, 2010 9:59 AM

Содержание AU5800















































































































































































Результаты поиска

Содержание AU5800

Отзывы:

Beckman Coulter AU5800, Быстрое руководство, Страница: 76 / 174

Результаты поиска

Содержание AU5800

Отзывы: