Beckhoff KL85 Series, Документация

Страница: 86 / 91

Data structures of the modules
KL85xx und KL9309 86 Version: 2.1.0
R12: Minimum data length of a channel
R16: Hardware version number
Register R16 contains the hardware version of the terminal.
R31: Code word register
• If you write values into the user registers without first entering the user code word (0x1235) into the
code word register, the terminal will not accept the supplied data.
• If you write values into the user registers and have previously entered the user code word (0x1235) in
the code word register, these values are stored in the RAM registers and in the SEEPROM registers
and are therefore retained when the terminal is restarted.
The code word is reset when the terminal is restarted.
R32: Feature register
With this register you can switch various features for this channel on or off.
Bit R32.15 R32.14 R32.13 R32.12 R32.11 R32.10 R32.9 R32.8
Name - - - - - - - enUserValue
Bit R32.7 R32.6 R32.5 R32.4 R32.3 R32.2 R32.1 R32.0
Name - - - enEcoMode - enWatchdog - -
Key
Bit Name Description default
R32.15 - reserved 0
bin
... ... ... ...
R32.9 - reserved 0
bin
R32.8 enUserValue 0
bin
User switch-on value activated 0
bin
1
bin
User switch-on value deactivated
R32.7 - reserved 0
bin
... ... ... ...
R32.5 - reserved 0
bin
R32.4 enEcoMode 0
bin
Bar graph activated 0
bin
1
bin
Eco Mode activated
R32.3 ... reserved ...
R32.2 enWatchdog 0
bin
Watchdog deactivated 1
bin
1
bin
Watchdog activated
R32.1 - reserved 0
bin
R32.0 - reserved 0
bin
R33: User switch-on value
If the user switch-on value has been enabled with bit R32.8 [
}
86] of the feature register, the terminal sets
its output to the user switch-on value in place of the manufacturer switch-on value on the occurrence of a
system reset or a watchdog timer overflow (terminal has not received any process data for 100 ms).