Beckhoff ATH2000-0250, Руководство по эксплуатации

Страница: 65 / 100

Mechanical installation
Version: 1.0 ─── 65 eXtended Transport System
2
1
► Push curved rail 1 carefully onto curved module 2
► Make sure that the seal remains in place
3
1
2
► Screw the screw with sealing ring 2 in the center of the curved
rail hand tight in order to press the curved rail completely against
the curved module
► Then screw in the other screws with sealing rings 1 and 3 hand
tight
1
► Loosen the fixed screws 1 in the upper guide rail somewhat in
order to mount the ends of the seals
► Mount the second curved rail with seals in the same way
The ends of the seals overlap at the starting points.
1
3
2
► Cut diagonally through both ends 2 of the overlapping seals 1
and 3 with a cutting tool
A scalpel or a hobby knife, for example, is a suitable cutting tool.
► Cut the seal on the other side of the system to length in the
same way
► Loosen the screws in the upper guide rail somewhat in order to
glue the seals