Technical description
Coreless linear motor AL3800
18
Version: 3.6
6.4
Additional equipment
You require further components for the proper installation of your linear servomotor.
These are not included in the scope of delivery.
6.4.1
Screws and locating pins
The screws and locating pins are needed to position and fasten the coil unit to the carriage, and also the
magnet yoke to the carrier frame.
Attribute
AL38xx
Screws for magnet yokes (stainless)
M6 x 50, EN ISO 4762
Screws for coil unit (steel);
Length depends on the thickness of the carriage
M5, EN ISO 4762
Locating pins (stainless)
3h8, EN ISO 8734
6.4.2
Servo drive and feedback system
The following components are required for the construction of a complete linear axis and its operation:
• Servo drive, e.g.: AX5xxx from Beckhoff Automation GmbH & Co. KG.
• Graduated rule and linear displacement transducer
• Cables, plugs and guides
• Mechanical support / machine bed
