Becker Traffic Assist Z 201, Руководство по эксплуатации

Страница: 10 / 98

10
>>> THE TRAFFIC ASSIST
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
USB connection cable
You can connect the unit to a standard
personal computer having a USB interface
using a USB connecting cable. The 2GB
flash memory of the Traffic Assist can
then be addressed via the PC like a remov-
able storage medium.
Unit bracket
The Traffic Assist can be mounted in the
vehicle using the unit bracket.
Accessories
Mains power supply unit
This power supply allows connection of
the Traffic Assist to a mains outlet.
Requirements for power supply:
Alternating current
• 100-240 V
0.2 Amps
50-60 Hertz
External GPS antenna
You can use an external antenna to im-
prove reception in vehicles where only
limited GPS reception is available (not in-
cluded in the scope of supply). Please con-
tact your local stockist for more informa-
tion.
Details of the connection can be found
under "Connecting up external antenna"
on page 19.
Headset
When using the Traffic Assist as an MP3
player, commercially available head-
phones with a 3.5 mm jack or adapter can
be connected (not included).
!
Danger!
Prevention of damage to hearing
The use of headphones or ear-
phones over a relatively long
period of time at a high vol-
ume may cause permanent damage to
your hearing.
Conformity with the limits for sound
pressure laid down in the standard NF
EN 50332-1:2000 as required by
French Article L. 5232-1 is guaranteed.
Note:
Headphones must not be used while
driving. Comply with the local national
laws and regulations.