Becker E12 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 28

Becker E12 Скачать руководство пользователя страница 3

General

These tubular drives are high-quality products with the following features:

•

Optimised for sun protection applications

•

Installation without stops is also possible (from extended point to retracted point)

•

Automatic detection of limit positions thanks to intelligent electronic system with stop systems

•

Tensile load is optimally adapted to the mechanical requirements of the sun protection system

•

The limit positions do not have to be reset: Changes in the shading solution are accommodated automatically when using stop
systems.

•

Easy setting of limit positions by pushing a button on the programming unit, via a switch on the drive, rotary switch or a locking
button

•

Considerably reduced stop load, and thus considerably reduced fabric load

•

Activate/deactivate the fabric untensioning function

•

Activate/deactivate the fabric stretching function

•

Left or right-hand installation

•

Several drives can be operated in parallel

•

Compatible with the comprehensive range of the drive manufacturer’s control units

•

Compatible with existing drives with electronic limit switching (4-core connecting cable)

•

Smooth operation of the system and the drive increases the service life

•

For plug-in connecting cable

Please observe these Assembly and Operating Instructions when installing and setting up the equipment.
The date of manufacture comes from the first four digits of the serial number.
The numbers 1 and 2 indicate the year and the numbers 3 and 4 indicate the calendar week.
Example: 34th calendar week in 2020

Ser. No.:

2034XXXXX

Explanation of pictograms

CAUTION

CAUTION indicates a hazardous situation which, if not avoided, could
result in injury.

ATTENTION

ATTENTION indicates measures that must be taken to avoid damage to
property.

Denotes user tips and other useful information.

Warranty

Structural modifications and incorrect installation which are not in accordance with these and our other instructions can result in
serious injuries, e.g., crushing of limbs. Therefore, structural modifications may only be carried out with our prior approval and
strictly in accordance with our instructions, particularly the information contained in these Assembly and Operating Instructions.
Any further processing of the products which does not comply with their intended use is not permitted.
The end product manufacturer and fitter have to ensure that all the relevant current statutory, official and, in particular, EMC regu-
lations are adhered to during utilisation of our products, especially with regard to end product manufacture, installation and cus-
tomer advice.

3 - en

«
1
2
3
4
5
...
»

Содержание E12





























Отзывы:

Нет отзывов