Becker E12 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 28

Becker E12 Скачать руководство пользователя страница 13

Deleting the limit positions with a rotary switch or a locking button

The switching commands sequence must be carried out in quick succession. Any addi-

tional functions that have been set are retained.

Carry out the following deletion sequence without interruption between the individual drive commands:

until

STOP

The tubular drive confirms.
Both limit positions are deleted.

Setting the limit positions using the programming unit

Intelligent installation management

Completion of installation following automatic setting of limit position "Stop"

Next time the “stop” limit position is travelled to, this position will be provisionally saved as the limit position. Once the limit position
has been detected at this position 3 times in a row without any problems, it will be definitively saved. This normally takes place dur-
ing regular operation.
To complete installation quickly, it is sufficient to travel to the “stop” limit position 3 times in a row from approx. 20 cm.

Limit position status indicator

A brief stopping and restarting indicates that no limit position has been set in that direction of movement.

Setting the limit positions

There are several ways to set the limit positions:

•

Extended point to retracted point

•

Extended point to retracted stop

•

Auto install

The limit position becomes fixed after the tubular drive has turned off

automatically

in the desired position three times.

If the tubular drive switches off prematurely while extending/retracting, due to an obstruc-

tion, the obstruction can be cleared by extending/retracting the screen and removing the

obstruction. The upper limit position can be set by extending/retracting again.

Attention

The programming unit is only designed for the commissioning, not for continuous opera-

tion.

Programming setting

Switch

Delete setting

Direction arrows

Programming button

Travel button

Connect the wires of the tubular drive to those of the same colour in the programming
unit (Item No. 4935 200 011 0) and switch on the power supply.

13 - en

«
...
11
12
13
14
15
...
»

Содержание E12





























Отзывы:

Нет отзывов