Becker E12 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 28

Becker E12 Скачать руководство пользователя страница 12

Extended point to retracted point

There is no shading solution length adjustment with this limit position setting.

Set both switches to the programming setting.

Open to the desired extended limit position.

Carry out the following sequence without interruption between the individual drive commands.

▻

The tubular drive confirms.

until STOP and hold until

Then open to the desired retracted limit position.

Carry out the following sequence without interruption between the individual drive commands.

▻

The tubular drive confirms.

until STOP and hold until

The limit positions are now set.

Extended point to retracted stop

Set both switches to the programming setting.

Open to the desired extended limit position.

Carry out the following sequence without interruption between the individual drive commands.

▻

The tubular drive confirms.

until STOP and hold until

Then retract to the permanent upper stop. During travel, the limit position status in-
dicator (LSI) must be displayed before the limit position is reached.

▻

The tubular drive switches off automatically.

The limit positions are now set.

12 - en

«
...
10
11
12
13
14
...
»

Содержание E12





























Отзывы:

Нет отзывов