Becker ACTIVE 45 страница 8 Скачать руководство пользователя

Страница: 8 / 146

>>>

SAFETY INSTRUCTIONS

> D

> GB

> F

> I

> PL

• It is forbidden to exceed the supply voltages (Volts) specified for the mains adapter, the motor vehicle charging adapter

and the product. In case of non-observance, the product or the charger may be damaged, or the battery may explode.

• Do not open the product or the battery under any circumstances. No modifications of the product are permitted, any such

modification leads to the loss of the operating permission.

• Only use original BECKER accessories. This way it is ensured that all relevant provisions will be met and that health risks

and damages to the product are avoided. Dispose of the used product or the battery according to the legal regulations in
effect.

• Improper use excludes all warranties! The safety instructions are also valid for any original BECKER accessories.

• Allowed temperature range: -20°C – 60°C storage / 0°C – 45°C operation

Содержание ACTIVE 45



















































































































































Результаты поиска

Содержание ACTIVE 45

Отзывы:

Похожие инструкции для ACTIVE 45

Бренды по названию

Популярные бренды

Becker ACTIVE 45, Руководство по эксплуатации

Результаты поиска

Содержание ACTIVE 45

Отзывы:

Похожие инструкции для ACTIVE 45

Бренды по названию

Популярные бренды