Becker ACTIVE 45 Скачать руководство пользователя

Страница: 43 / 146

NAVIGATION MODE

>>>

> D

> GB

> F

> I

> PL

A list of the available destinations will be
displayed.
Using the

buttons or the scroll

wheel, it is possible to scroll through the
list.

Select the desired destination.

Route guidance to the selected
destination will be initiated.

Editing Personal destinations

In the list of your own destinations,
press the

button in front of the

destination that you wish to edit.

Select

Delete entry

if you wish to delete

the destination from the list. Select

Delete all entries

if you wish to delete the

entire list.
Select

Show details

if you wish to display

details about the destination.

Press the

Start

button to begin route

guidance to the destination straight
away.
You can also display your chosen
destination on the map (

On map

), store it

in fast access mode (

Save

), display the

route to the destination (

Show route

) or

call the number if a telephone is
connected and a phone number is
available by pressing the button with the

symbol.

Selecting a destination from Contacts

You can call up Microsoft

Outlook

contacts that have been imported into
the Navigation device and start route
guidance to one.

In the main menu, press the button

destinations

Press the

Contacts

button.

An input menu appears if there are more
than 10 contacts. If there are fewer than

Note:

If the list contains numerous entries, it
may be a good idea to search for the
desired destination by selecting

Search

entry

and using the input menu.

A maximum of 1000 destinations can be
imported.
Newly imported destinations are filed at
the start of the list.

Note:

The Microsoft

Outlook

contacts are

imported via the Content Manager.

Содержание ACTIVE 45



















































































































































Результаты поиска

Содержание ACTIVE 45

Отзывы:

Похожие инструкции для ACTIVE 45

Бренды по названию

Популярные бренды

Becker ACTIVE 45, Руководство по эксплуатации

Результаты поиска

Содержание ACTIVE 45

Отзывы:

Похожие инструкции для ACTIVE 45

Бренды по названию

Популярные бренды