Operating Instructions
49
LONGITUDE/LATITUDE/TIME ZONE (only when EXPERT MODE is ON)
You can find out your coordinates, for example, with the aid of an atlas.
SUMMER/WINTER
SUMMER/WINTER describes the automatic clock adjustment for daylight saving changes.
If the default setting is ON, the time switch adjusts automatically.
FUNCTION
This mode is only intended for qualified electricians!
(Will only appear when the operating device is disconnected)
The FUNCTION menu gives you the option of setting the following functions:
• ROLLER SHUTTER/BLIND (select either shutter or blind)
• DRIVE CONTROLLER/GROUP CONTROLLER
• RUNNING TIME
• EXTERNAL (SWITCH/OFF/ON) Switches external group inputs
• ALARM SIGNAL
• EXPERT MODE
• INITIAL OPERATION (for purposes of service)
• RELAY (for purposes of service)
• TOTAL RUNNING TIME (for purposes of service)
DRIVE CONTROLLER
The drive is connected directly to the TC52.
GROUP CONTROLLER
The TC52 controls a group.
EXTERNAL OFF/EXTERNAL ON/EXTERNAL SWITCH
• EXTERNAL OFF
➔
group inputs are always switched off.
• EXTERNAL ON
➔
group inputs are always switched on.
• EXTERNAL SWITCH
➔
group inputs are switched on in auto mode, switched off in
manual mode.
EXPERT MODE
If selecting the city (EXPERT MODE OFF) is not precise enough, you can make a fine
adjustment by setting the degrees of longitude and latitude (EXPERT MODE ON).