Bear 70-030, Руководство пользователя и по обслуживанию

Страница: 12 / 32

12 / 32
REV. 01
•
Connect the pneumatic quick connect male plug corresponding to the shop’s air supply (hose)
onto the filter assembly. Use a sealant such as Teflon tape to avoid air leaks. Connect the shop’s air
supply to the Quick connect adapter, as shown below (Fig. 5/d). Keep the air flow off until the
machine is ready for operation.
•
Connect the hose coming out from the back of the machine into the fitting located at the bottom
of the vertical column. Slide the hose onto the fitting and then fasten the clamp.
•
Insert the knob/pin assembly into the desired position of the bead breaker