Beamreach networks BeamPlex BRU-100, Руководство по установке и обслуживанию

Страница: 48 / 56

Ch. 4 Status Monitor Remote Unit Installation
Status Monitor Displays Service Utilities
42
Pre-Production
1106333-01
Revision 3
•
Signal Strength (Bar)
The graduation numbers on the dynamic bar display are relative, they
do not have a unit of measure. The approximate signal levels at the
guidance marks are as follows:
0
= Approximately -127 dBm
OK
= Approximately -122 dBm
Good
= Approximately -112 dBm
Excellent
= Approximately -99 dBm
The display’s maximum is -80 dBm.
•
Selected Code
This is the base station offset code, which is a unique identifier the
remote unit uses to distinguish one base station from another. The
displayed code indicates the base station with which the remote unit is
registered.
•
Link Status
This is the current functional status of the remote unit. The status
information is used primarily for technical service calls. A fully
functional unit has a status of
Airlink Active (14)
.
•
Signal Strength (Value)
This field provides a numerical display of the signal strength shown in
the dynamic bar display. See the explanation above for Signal Strength
(Bar).
•
Signal Strength Details
This button generates a report containing highly technical data. This is
discussed in the section
Signal Strength Details on page 31.
•
Message Log
This button opens a log of the current session. This is discussed in the
section
Message Log on page 32.