Beamreach networks BeamPlex BRU-100, Руководство по установке и обслуживанию

Страница: 19 / 56

Remote Unit Installation Ch. 2 Preparation
Service Utilities Software
1106333-01
Pre-Production
13
Revision 3
IP Address
The service computer must have a static IP address that is compatible with
the remote unit’s address, which is delivered with the default address of
192.168.1.1. Set the IP address in the service computer as follows:
♦
IP address
192.168.1.X
Where X is any number between 2 and 255. If the number you
choose causes a conflict with another network device, you will see an
error message. If this occurs, try a different number for the X value.
♦
Subnet mask
255.255.255.0
Software
This section lists the software files you must load onto the service
computer prior to a service call.
Service Utilities
The service utilities are not packaged in an installation shield at this time.
The files are delivered in a self-extracting Zip file (
bruit.exe
) on a CD.
Create a new directory on the service computer and unzip the files into it.
Open the applications by executing these files:
♦
BRU-IT.exe
– BeamPlex Remote Unit Installation Tool
♦ BRU-Mon.exe
– BeamPlex Remote Unit Monitor
You may to create shortcuts to these files for ease of use.
Software Image
You must also download and store the current remote unit software image
file , which contains updates to the operating system. Step 3 in the
installation tool allows you to read the software version currently in the
remote unit, and to send a new image file if an update is indicated.
A software image file is provided by BeamReach Networks and should be
stored in your system on a TFTP server.