Beamreach networks BeamPlex BRU-100, Руководство по установке и обслуживанию

Страница: 11 / 56

Remote Unit Installation Ch. 1 Introduction
Service Utilities Remote Unit Service Utilities
1106333-01
Pre-Production
5
Revision 3
Remote Unit Service Utilities
The service utilities are two applets designed to support the installation
and maintenance of a remote unit:
BRU Installation Tool (BRUIT)
The installation tool consists of a set of GUI windows that guide the
installer through the steps of the configuration and activation process.
Latitude/longitude coordinates of the subscriber’s premise and compass
bearings to the closest base stations are used to accurately point the
antenna in areas of difficult reception. The GUI contains a signal
strength indicator and other technical displays. Installers can set
certain configuration parameters and install software upgrades with
this tool.
The BRUIT is used primarily for BRU-100 professional installations. It
is also used for onsite technical support if a subscriber encounters
problems with either model of remote unit.
BRU Status Monitor
The status monitor displays information about the state of the air link
between the remote unit and the base station. It provides a utility to
change the IP address in the remote unit, and it performs a basic
continuity check between the PC and the remote unit, and between the
PC and base station.
The status monitor utility is part of the service utilities, but it was
designed for the subscriber and is installed on their computer.