Beam RemoteSAT RST100B, Инструкция по установке и эксплуатации

Страница: 26 / 40

RST100B INSTALLATION & USER MANUAL
26
Configuring SMS-POTS Feature
Note:
The SMS-POTS Functionality is only available on RST100B terminals with
the following serial number type :
Serial Numbers 100XXXX “ The serial number must contain an “A” to
support the SMS-POTS Functionality. Refer to the User Information
section to verify your RST100B is SMS capable.
The RST100B can support the use of an SMS-POTS telephone to provide SMS
messaging over the Iridium network without the need to use an Intelligent handset or a
Computer to send and receive SMS messages.
Using a POTS-SMS telephone it is possible to initiate an SMS message and send it to
another Iridium user or to another cellular user (selected Service Providers only).
Do not use an Intelligent handset in conjunction with an SMS-POTS telephone as
the Intelligent handset and the SMS-POTS telephone cannot receive SMS messages
sequentially. The SMS-POTS telephone will always have priority.
Using an SMS-POTS telephone connected to an RST100B enables the handset to be
run long distances from the RST100B over whilst still supporting SMS. Typically the
Intelligent type handsets are limited to less than 10m/30’ whereas the SMS-POTS being
on the RJ11 line will support 100s metres / 1000s feet.
Connecting an configuring an SMS-POTS telephone
An SMS-POTS telephone is easily connected to the RST100B terminal via the RJ11
connection (as mentioned in ‘Connecting a Handset or other POTS/RJ 11 device’
section of this document).
Using the Beam Management System the RST100B must be configured to enable the
SMS-POTS feature.
For more information, consult the RST100B Configuration and Beam Management
System Manual, Available for download from
www.beamcommunications.com/support/RST100B