Beam RemoteSAT RST100B, Инструкция по установке и эксплуатации

Страница: 22 / 40

RST100B INSTALLATION & USER MANUAL
22
PIN Codes
To activate your RST100B to make and receive calls, you may need to enter a PIN code,
described below.
RST100B Signal LED Handset tone Action required
Flashing Red LED Distinctive dial tone: two
tones of equal length Enter four digit SIM PIN
and await a change of tone
(up to 10 seconds), then
hang up.
When successful the
phone will register and
proceed with normal use
Flashing Red LED Distinctive dial tone: high
tone is longer than low
tone Enter the PUK code , await
a change of tone (up to ten
seconds) and hang up.
When successful the
phone will register and
proceed with normal use
Constant LED Normal dial tone No action required
The PUK code is required to be entered if the SIM PIN is entered
incorrectly 3 times in a row. The SIM card will be permanently disabled if
an incorrect PUK is entered 10 times in a row.