Beam MG200, Руководство пользователя

Страница: 78 / 291

MG200 USER MANUAL
78 of 269
©
2019 BEAM
3.2 LAN & VLAN
This section provides the configuration of LAN and VLAN.
3.2.1 Ethernet LAN
Navigate to the Network > LAN & VLAN > Ethernet LAN tab.
The
Ethernet LAN window provides the settings on load Ethernet LAN port.
Configuration
Item
Value setting Description
IP Mode
System data.
It shows the LAN IP mode for the MG200 according to the related
configuration.
Static IP : If there is at least one WAN interface activated, the LAN
IP mode is fixed in Static IP mode.
Dynamic IP : If all the available WAN interfaces are disabled, the
LAN IP mode can be Dynamic IP mode.
LAN IP
Address
Mandatory field.
Default setting:
192.168.123.254
Enter the local IP address of the MG200.
The network MG200(s) on your network need to use the LAN IP
address of the MG200 as their Default MG200. You can change it
if necessary.
Note : It’s also the IP address of web UI. If you change it, you
need to type new IP address in the browser to see web UI.
Subnet
Mask
Mandatory field.
Default setting:
255.255.255.0 (/24)
Select the subnet mask for the MG200 from the dropdown list.
Subnet mask defines how many clients are allowed in one
network or subnet. The default subnet mask is 255.255.255.0
(/24), and it means maximum 254 IP addresses are allowed in this
subnet. However, one of them is occupied by LAN IP address of
the MG200, so there are maximum 253 clients allowed in LAN
network.
Value Range: 255.0.0.0 (/8) - 255.255.255.252 (/30).
The MG200 provides the LAN IP alias function for some special management consideration. You can add
additional LAN IP for the MG200, and access to the MG200 with the additional IP.