Beam MG200, Руководство пользователя

Страница: 59 / 291

MG200 USER MANUAL
59 of 269
©
2019 BEAM
Select Manual-configuration to set APN (Access Point
Name), Dial Number , Account , and Password to what your
carrier provides.
Select
APN Profile List to set more than one profile to dial up
in turn, until the connection is established. It will pop up a
new filed, please Navigate to
Network > WAN & Uplink >
Internet Setup > SIM-A APN Profile List for details.
Select Auto-detection to automatically bring out all
configurations needed while dialing-up, by comparing the
IMSI of the SIM card to the record listed in the manufacturer’s
database.
Note 1: You are highly recommended to select the Manual or
APN Profile List to enter the network for your subscription.
Your ISP always provides such network settings for the
subscribers.
Note 2: If you select Auto-detection, it is likely to connect
to the wrong network, or fail to find a valid APN for your ISP.
IP Type
Mandatory field.
Default setting:
IPv4 .
Enter the IP type of the network service provided by your
3G/4G network. It can be
IPv4 , IPv6 , or IPv4/6 .
PIN code
Optional field.
String format:
interger. Enter the PIN (Personal Identification Number) code if it needs
to unlock your SIM card.
Dial Number,
Account,
Password Optional field.
String format: any
text.
Enter the optional Dial Number , Account , and Password
settings if your ISP provided such settings to you.
Note: These settings are only displayed when Manual-
configuration is selected.
IP Mode
Mandatory field.
Default setting:
Dynamic IP .
When Dynamic IP is selected, it means it will get all IP
configurations from the carrier’s server and set to the MG200
directly.
If you have specific application provided by the carrier, and
want to set IP configurations on your own, you can switch to
Static IP mode and fill in all parameters that required, such as
IP address, subnet mask and MG200.
Note
: IP Subnet Mask is Mandatory field., and make sure
you have the right configuration. Otherwise, the connection
may get issues.
Primary DNS
Optional field.
String format: IP
address (IPv4 type). Enter the IP address to change the primary DNS (Domain
Name Server) setting. If it is not filled-in, the server address is
given by the carrier while dialing-up.
Secondary DNS Optional field. Enter the IP address to change the secondary DNS (Domain