Beam MG200, Руководство пользователя

Страница: 186 / 291

MG200 USER MANUAL
186 of 269
©
2019 BEAM
Remote Subnet
Mandatory field. Enter the remote subnet for this PPTP tunnel to reach PPTP
server.
The Remote Subnet format need to be IP address/netmask (e.g.
10.0.0.2/24).
It is for the Intranet of PPTP VPN server. So, at PPTP client peer,
the packets whose destination is in the dedicated subnet will be
transferred via the PPTP VPN tunnel. Others will be transferred
based on current routing policy of the security MG200 at PPTP
client peer.
If you entered 0.0.0.0/0 in the Remote Subnet field, it will be
treated as a default MG200 setting for the PPTP client peer, all
packets, including the Internet accessing of PPTP Client peer, will
go through the established PPTP VPN tunnel. That means the
remote PPTP VPN server controls the flow of any packets from
the PPTP client peer. Certainly, those packets come through the
PPTP VPN tunnel.
Authentication
Protocol
Mandatory field.
Disabled by
default. Enter one ore multiple Authentication Protocol for this PPTP
tunnel.
Available authentication methods are
PAP / CHAP / MS-CHAP /
MS-CHAP v2 .
MPPE
Encryption
Optional field.
Disabled by
default. Enter whether PPTP server supports MPPE Protocol . Click the
Enable box to enable MPPE.
Note: when MPPE Encryption is enabled, the Authentication
Protocol
PAP / CHAP options will not be available.
NAT before
Tunneling
Mandatory field.
Disabled by
default. Enter whether NAT is required or not for this PPTP tunnel.
LCP Echo Type
Default setting:
Auto.
Enter the LCP Echo Type for this PPTP tunnel. It can be Auto ,
User-defined , or Disable .
Auto : the system sets the Interval and Max. Failure Time.
User-defined: enter the Interval and Max. Failure Time. The
default value for Interval is 30 seconds, and Maximum Failure
Times is 6 Times.
Disable : disable the LCP Echo.
Value Range: 1 - 99999 for Interval Time, 1-999 for Failure Time.
Tunnel
Disabled by
default. Check the Enable box to enable this PPTP tunnel.
Save
Button. Click Save button to save the settings.
Back
Button.
When the X button is clicked, the window will return to the
Application Filter Configuration page.
6.1.5 GRE
Navigate to the Security > VPN > GRE tab.