Beam MG200, Руководство пользователя

Страница: 177 / 291

MG200 USER MANUAL
177 of 269
©
2019 BEAM
L2TP Server Configuration
Item
Value setting Description
L2TP Server
Disabled by
default. When click the Enable box.
It will active L2TP server.
Interface
Mandatory field.
Default setting:
All
WANs .
Select the interface on which L2TP tunnel is to be established. It
can be the available WAN interfaces.
L2TP over IPSec
Disabled by
default.
When click the Enable box.
It will enable L2TP over IPSec and need to fill in the Pre-shared
Key (8-32 characters).
Server Virtual IP Mandatory field.
Enter the L2TP server Virtual IP.
It will set as this L2TP server local virtual IP.
IP Pool Starting
Address Mandatory field.
Default setting:
10.
Enter the L2TP server starting IP of virtual IP pool.
It will set as the starting IP which assign to L2TP client.
Value Range: 1 - 254.
IP Pool Ending
Address
Mandatory field.
Default setting:
17.
Enter the L2TP server ending IP of virtual IP pool.
It will set as the ending IP which assign to L2TP client.
Value Range : >= Starting Address, and < (Starting A 8)
or 254.
Authentication
Protocol
Mandatory field.
Select single or multiple Authentication Protocols for the L2TP
server with which to authenticate L2TP clients. Available
authentication protocols are
PAP / CHAP / MS-CHAP / MS-
CHAP v2 .
MPPE
Encryption
Mandatory field.
Enter whether to support MPPE Protocol. Click the Enable box to
enable MPPE and from dropdown box to select 40 bits / 56 bits /
128 bits .
Note: when MPPE Encryption is enabled, the Authentication
Protocol
PAP / CHAP options will not be available.
Service Port
Mandatory field.
Enter the Service Port which L2TP server use.
Value Range : 1 - 65535.
L2TP Server Status
Item
Value setting Description
L2TP Server
Status
System data.
Displays the Username, Remote IP, Remote Virtual IP, and
Remote Call ID of the connected L2TP clients.
Click the
Refresh button to renew the L2TP client information.
User accounts can be added via the
User Account List window.