Beam MG200, Руководство пользователя

Страница: 248 / 291

MG200 USER MANUAL
248 of 269
©
2019 BEAM
port is 161 .
Mandatory field.
Value Range: 1 - 65535.
Limited Remote
Aceess IP
String format: any
IPv4 address.
It is an optional
item.
Enter the Remote Access IP for WAN and check the box to
enable it as well.
Select
Specific IP Address , and fill in a certain IP address. It
means only this IP address can access SNMP from LAN/WAN
side.
Select
IP Range , and fill in a range of IP addresses. It means the
IP address within specified range can access SNMP from
LAN/WAN side.
If you left it as blank, it means any IP address can access SNMP
from WAN side.
The Multiple Community List window allows you to customize your access control. The router supports up to
10 community sets.
When Add button is applied, Multiple Community Rule Configuration window will pop up.
Multiple Community Rule Configuration
Item
Value setting Description
Community
Mandatory field.
String format: any
text.
Default setting:
Read Only .
Enter this version 1 or version v2c user ’s community that will be
allowed Read Only (GET and GETNEXT) or Read-Write (GET,
GETNEXT and SET) access respectively.
The maximum length of the community is 32.
Enable Enabled by default Click Enable to enable this version 1 or version v2c user.
Save
Button.
Click the Save button to save the configuration. But it does not
apply to SNMP functions. When you return to the SNMP main