Beam MG200, Руководство пользователя

Страница: 243 / 291

MG200 USER MANUAL
243 of 269
©
2019 BEAM
STARTUP Script file For the configurations that can be configured with
standard Linux commands, you can put them in a script
file, and apply the script file with STARTUP command.
For example,
STARTUP=#!/bin/sh
STARTUP=echo “startup done” > /tmp/demo
The MG200 accepts Telnet CLI commands. You
can use the proprietary telnet command “ txtConfig ” and related
action items to perform the plain system configuration.
The command format is: txtConfig (action) [option]
Action Option Description
clone Output file Duplicate the configuration content from database and stored
as a configuration file.
(ex: txtConfig clone /tmp/config)
The contents in the configuration file are the same as the plain
text commands mentioned above. This action is exactly the
same as perf
orming the “Backup” plain text configuration.
commit An existing file Commit the configuration content to database.
(ex: txtConfig commit /tmp/config)
enable NA Enable plain text system config.
(ex: txtConfig enable)
disable NA Disable plain text system config.
(ex: txtConfig disable)
run_immediately NA Apply the configuration content that has been committed in
database.
(ex: txtConfig run_immediately)
run_immediately An existing file Assign a configuration file to apply.
(ex: txtConfig run_immediately /tmp/config)
7.1.2 TR-069
Navigate to the Administration > Remote Management > TR-069 tab.
TR-069 (Technical Report 069) is a Broadband Forum technical specification entitled CPE WAN Management
Protocol (CWMP). It defines an application layer protocol for remote management of end user MG200s, like the
MG200. As a bidirectional SOAP/HTTP-based protocol, it provides the communication between customer
provided equipment (CPE) and Auto Configuration Servers (ACS). The Security MG200 is such CPE.