Beam BlueEvolution S, Руководство пользователя

Страница: 14 / 29

Error….
Cause Remedy
Suction switches off, you hear an
acoustic signal and LED (D) flashes
on the display
Filter bowl full
Empty the filter bowl and refill with fresh tap
water up to the Max. fill level
Fluff, fibres or hair in the filter bowl Empty the filter bowl, clean out the hair and
fluff and refill with fresh tap water up to the
Max. fill leve
l
Foam in the filter bowl Empty the filter bowl and refill with fresh tap
water up to the Max. fill level.
Tip: To minimise foam build-up, add 3 drops
of non-acidic oil (e.g.: sewing machine or
light vegetable oil) to the filter bowl
There is little or no steam and no hot
water Limescale in hot water modul
Perform “Hot water descaling”
(Service/Maintenance
–
Part 1)
Steam very wet Limescale in boiler and probe cap
Check the probe cap and perform “Boiler
descaling” (Service/Maintenance –
Part 2)
Hot water is switched on Briefly press button (T4) on the handle or
button (C) on the display
There is no hot water Hot water not switched on Briefly press button (C) on the display and
then button (T4) on the handle
Reservoir tank (P) is empty Fill reservoir tank (P) hot water with clear tap
water
Suction is not working Filter bowl not in position Re-insert filter bowl. Important: the lug on the
cover must sit in the guide on the appliance
Not switched on on the display Press briefly on button (B) on the display;
suction can then be switched on using button
(T3) on the handle
No suction HEPA filter dirty Replace HEPA filter
Foreign body or dirt in the hose or
accessory Check hose and accessory and clean as
required