6
Look foward to it.
Assembly / preparation
Filling the filter bowl
Your appliance is itted with a hygienic water ilter. You must
ill the ilter bowl with water before starting, in order to bind
the extracted dirt in the water and to clean the suctioned air
in the water bath as well.
• Loosen the clips on the right and left of the ilter bowl and
remove from its slot.
• Open the cover on the ilter bowl by pushing off the rele-
vant clips.
• Fill with tap water up to the MAX. level indicated, using the
integrated siphon within the ilter bowl (approx. 2.0 litres).
• Re-insert the ilter bowl, ensuring the switch cam on the
cover is in the correct position.
WARNING:
The appliance can suck in up to approx. 1.5 litres of liquid.
If you exceed this amount, the ill level sensor will stop suc-
tion automatically and LED
D
(page 2) on the display will
lash.
INFO:
If you only wish to suction liquid, such as accidental water
spills, it is not necessary to ill the appliance's ilter bowl with
water.
When sucking liquids, the MAX. capacity in the container is
approx. 4 litres.
Inserting the steam suction hose
• Insert the connector of the steam suction hose into the
socket until you hear the click of the safety hook.
• To remove the hose from the appliance, press release but-
ton
A
and pull on the connector.
A
