background image

20     

BE-SGGxxx USER MANUAL

A-weighted sound power level emitted by the machine: 100.6dB for model SGR650; 103.8dB for model 

SGR1500.
A-weighted emission sound pressure level at the operator’s station: 86.8dB for model SGR650; 90.8dB for 

model SGR1500.
The vibration total value to which the hand-arm system is subjected, less than 7.4 m/s2 for model SGR650; 

6.9 m/s2 for model SGR1500
The range of temperature in which the machine is intended to operate and be stored is 5-40°C;

SUMMARY OF IMPORTANT SAFETY INFORMATION

This section provides a summary of the various safety procedures and measures that have been presented 

throughout the manual. Keep this summary handy and refer to it to refresh your memory about how to  

safely use your grinder.

WARNING

Carefully read and make sure you understand the following safety information before using the grind-

er. Improper use or maintenance of the grinder can result in serious injury or death from fire/explosion, 

carbon monoxide poisoning, lacerations, entanglement or burns. Damage can also occur to windows, 

siding, vehicles, and bystanders from chips and debris which can become projectiles.

GENERAL

• Read manual.

 Read this Owner’s Manual and the engine Owner’s  

Manual completely before attempting to use and service the grinder. Serious injury or death can result if 

safety instructions are not  

followed.

• Instruct operators.

 The grinder owner or rental company must instruct all operators in safe grinder set-up 

and operation. Do not allow anyone to operate the grinder who has not read the Owner’s Manual and been 

instructed on its safe use. Make sure Owner’s manual is within the attached storage tube on the grinder.

• Adults only.

 Only trained adults should operate and service the grinder. Do not let children operate.

• Under the influence.

 Never operate, or let anyone else operate, the grinder while under the influence of 

alcohol, drugs, or medication.

• Intended use.

 Carefully read about and understand the intended use of this grinder. Do not use for other 

purposes, as unforeseen hazards or equipment damage may result.

• Controls and safety labels.

 Learn how to use the machine and it’s controls safely. Understand and follow all 

safety labels.

• Weather.

 Never use in foul, bad or questionable weather, which causes a slippery ground condition.

PROHIBITION AGAINST MODIFICATIONS

Never modify or alter the grinder in any way. Modifications can create serious safety hazards and will also 

void the warranty. 

• Fuel/exhaust system. 

Never modify the exhaust system, fuel tanks, or fuel lines. Carbon monoxide  

poisoning, fire, or explosion could result.

• Guards.

 Do not operate grinder unless all guards and cover shields, which prevent access to moving parts 

and pinch points, are in place. Failure to guard the power transmission mechanisms may result in serious 

injury or death.

SAFETY - BEFORE USE

Know how to operate
• Review safety rules

. Before use of this grinder, review the “Rules for Safe Operation.”

• Know how to operate.

 Be thoroughly familiar with all controls and with the proper use of the equipment. 

Know how to stop the grinder quickly if needed.

Getting Ready
• Flying debris.

 Clear area of objects such as stones, toys, steel wire, etc. that could become caught in  

moving machine parts and ejected as a projectile.

• Operate OUTSIDE only – dangerous carbon monoxide exhaust! 

 

Grinders give off carbon monoxide exhaust, a poisonous gas that can kill. You CANNOT smell it, see it, or 

Содержание Agri Ease BE-SGG Series































Отзывы: