BE Ag & Industrial Agri Ease BE-SGG Series, Руководство по эксплуатации и запасным частям

Страница: 18 / 30

18
BE-SGGxxx USER MANUAL
INSTALLING TEETH
Among the most critical elements of the stump grinder is the cutting wheel. It is also the most subject to
damage and wear. In the course of grinding stumps it not only makes contact with the wood, but also
encounters numerous abrasives and objects in the stump’s environment, such as dirt, stones, large rocks and
buried scrap.
The loss and wear of cutting teeth can significantly impair the efficiency and performance of the stump
grinder. Therefore, it is important to make frequent inspections of the condition of all the cutting teeth and
to replace any damaged or worn teeth
Thread in the bolt through the cutter wheel and into the teeth as shown, then tighten. Bolt should be torque
to 60ft/lbs.
MAINTENANCE SCHEDULE
CAUTION
Before attempting any maintenance, be sure that the engine is shut off, the spark plug wire is removed,
and the engine is cool to the touch!
IMPORTANT:
If a part needs replacement, only use parts that meet the manufacturer’s specifications. Replacement parts
that do not meet specifications may result in a safety hazard or poor operation of the grinder.
Item -What to check or
action req’d
Daily Each Use 10 hours 20 hours 40 hours
Bearing, Shaft-Grease
X
Belt Tension-Tension
X
Bolts-Tightness
X
Engine See Manual
Gasoline-Amount
X
Safety Switch-Operation
X
Warning Decals-Legible
X
Tires, Flaps-Condition
X
Wires, Cables-Condition
X
Cutter Teeth-Sharpness
X