BE Ag & Industrial Agri Ease BE-SGG Series, Руководство по эксплуатации и запасным частям

Страница: 22 / 30

22
BE-SGGxxx USER MANUAL
• Damaged. Do not operate the grinder with damaged, missing, incorrectly adjusted, or broken parts.
• Check for gas leak before starting.
After opening gasoline valve, smell for gas before starting engine. If
you smell gas, DO NOT start engine. DO NOT light a match. DO NOT flip on an electrical switch. Exit area
immediately and call fire department.
• Carbon monoxide exhaust. The running engine gives off carbon
monoxide, a poisonous gas that can kill you. You CANNOT smell it, see it, or taste it. If you start to feel sick,
dizzy, or weak while using the grinder, shut off the engine and get to fresh air RIGHT AWAY. See a doctor.
You may have carbon monoxide poisoning.
• Other exhaust dangers
. This product contains or emits chemicals to cause cancer, birth defects or other
reproductive harm. Avoid inhalation of exhaust.
• Smoking/sparks. Never smoke near the running grinder, and never operate near sources of sparks or
flames.
• Hot muffler.
Never touch hot muffler or hot exhaust manifold. Exhaust and engine parts can be very hot
and will burn you.
• Machine’s moving parts. Keep hands, feet, and apparel away from drive belts, cutter wheel, and other
moving parts. Never remove any drive belt or guard while the unit is operating. Contact with belt or rotat-
ing teeth will cause personal injury.
• Refueling.
DO NOT refuel the engine until it has cooled at least 30 minutes.
• Malfunction during operation. Always shut the machine off if any unusual noise or vibration occurs.
• Vibration. Overexposure to machine vibration on a daily basis may lead to circulatory or nerve damage.
• Adjusting / repairing. Always turn off grinder and remove spark plug or spark plug wire before working on
the grinder to prevent accidental starting.
• Cleaning the Jam: If the machine is jammed, stop the engine and remove the sparkplug wire before
attempting to clear any jams in the unit. Stop all work, turn off stump grinder, unplug spark wire and ensure
the engine is turned off and cooled before performing any diagnostics or repairs.
SAFETY-AFTER USE
• Cool engine before storing.
Let engine cool for at least five minutes before storing. A hot engine can be a
fire hazard.
• Shut off fuel supply. Make sure gasoline shut-off valve is in the OFF position.
• Prevent accidental starting.
When grinder is not in use, remove key from starter (electric start engines)
and secure in a safe location, or remove spark plug in order to ensure that grinder cannot be started in a
storage location or by untrained persons.
• Storage location. Store the grinder in a dry location away from sources of heat, open flames, sparks or
pilot lights – such as water heaters, space heaters, furnaces, clothes dryers, or other gas appliances – EVEN
IF the grinder’s gas tank is empty. Residual gasoline could ignite.
• Exercise regularly
. Exercise grinder every four weeks to dry out moisture that accumulates in the windings.
If grinder cannot be exercised on a regular basis, prepare grinder for long term storage.
SAFETY - INSPECTION / MAINTENANCE
Inspect and maintain your grinder on a regular basis and repair as needed to keep it in safe working
condition:
• Turn off grinder. Always turn off grinder and remove spark plug or spark plug wire before working on the
engine or grinder to prevent accidental starting.
• Replace guards / shields.
Make sure all guards and shields are
replaced after servicing the grinder.
• Burns. Do not touch hot muffler. Muffler will be hot even if unit is stopped. Allow unit to cool before
servicing.
• Replacement parts. If a part needs replacement, only use parts that meet the manufacturer’s
specifications. Replacement parts that do not meet specifications may result in a safety hazard or poor
operation of the grinder and will void the warranty.