BE Ag & Industrial Agri Ease BE-SGG Series, Руководство по эксплуатации и запасным частям

Страница: 11 / 30

BE-SGGxxx USER MANUAL
11
• For cold engine, mover choke lever to the CLOSED position. To restart a warm engine, leave choke lever in
OPEN position.
• Turn engine switch to the ON position.
• Grip operator presence bar and handle bar together in left hand.
WARNING
Stay in the OPERATOR POSITION (Behind the machine) while actuating controls. Never leave grinder
unattended.
WARNING
A rotating cutting wheel is very dangerous. Stay at the controls and keep others away until you are sure
the blades has come to a complete stop.
• Pull the starter grip lightly until you feel resistance, then pull briskly. Return the starter grip gently. If the
choke lever was moved to the CLOSED position to start the engine, gradually move it to the OPEN position
as the engine warms up.
• If engine does not start, repeat steps 5-7.
• Press down on handle bar to lift cutter wheel off the ground.
• Grip throttle control lever and handle bar together in right hand. Centrifugal clutch will engage and cutter
wheel will begin to rotate.
3. STOPPING THE ENGINE
Stop the engine using the following steps:
• While holding blade off ground, release the operator presence bar. The engine will stop. Wait until the
blade completely stops. Lower the blade so it is resting against the ground.
• Make sure brake is set before leaving the controls, particularly if you are on an incline.
• Turn engine switch to OFF position.
• Allow the engine to cool for at least 30 minutes before releasing brake and moving to storage or
transporting. A hot engine can be a fire hazard.