BDV Phantom 800, Руководство пользователя, Страница: 73 / 78

. . . . .
R S - 2 3 2 A N D 1 0 / 1 0 0 T P R O T O C O L
Phantom 800 Command Set
Phantom 800 User Guide Edition 1.06
67
INPUTAUTOSENSE INAS [on/off]
Turns the SD input auto sensing on or off.
When autosense is ON , the unit attempts to
automatically identify the format of the input
signal (component, svideo, or composite).
When autosense is
OFF
, the format of the input
signal must be set using the
INPUTFORMAT
command.
Default = ON.
INPUTTESTPATTERN INTP <host> <pattern>
Turns on the test pattern
<pattern>
with host
<host>
from the input RGB converter. The
converter generates an RGB host signal internally.
To turn the test pattern generator off, issue the
command
intp F <host> . Although it is
required, the
<host>
setting is ignored.
Test patterns
<pattern>
:
0 color bars
1 grey ramp
2 red ramp
3 green ramp
4 blue ramp
5 grey 64 steps
6 red 64 steps
7 green 64 steps
8 blue 64 steps
9 Auto
Calibration
F Turns the test pattern generator off
Output modes
<host>
:
0 800x600
1 1024x768
2 1280x1024
3 1600x1200
4 1920x1080
5 1920x1200
IPADDRESS IPADDR <ip address> Sets the static IP address for network use.
IPGATEWAY IPGW <ip gateway>
Sets the network gateway.
IPNETMASK IPNM <net mask> Sets the network mask.
NEWEDID NEDID <INPUT #> <hfp> <hs>
<hbp> <hact> <vfp> <vs>
<vbp> <vact> <hfreq> <sync>
<phase> <vpol> <hpol>
<interlace>
Creates a special EDID timing for the designated
input, with the specified parameters.
<hfreq> in Hz.
<sync>
is 3,4, or 5 wire.
<vpol>
is vertical sync polarity; 1 = positive, 0 =
negative.
<hpol>
is horizontal sync polarity.
<interlace>
is 1 = interlaced, 0 = non-
interlaced.
SYSTEM COMMANDS
Command Syntax Action
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .