BDV Phantom 800, Руководство пользователя, Страница: 44 / 78

M A T R I X S W I T C H I N G
Matrix Switching Control- RS-232 and 10/100T
38
Edition 1.06 Phantom 800 User Guide
E X A M P L E
In Figure 10 , the switch command is used to route a DVI video source connected to Input 3
to three different output channels. If all three commands are issued in succession, the result
is that Input 3 would appear on all three output devices.
O u t p u t S t a t u s C o m m a n d
The OSTAT command is used to determine which input is connected to a particular output.
The command is:
OSTAT <output #>
Command Action
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SW 1 1
Example A— routes Input 1 to Output 1
SW 1 3
Example B— routes Input 1 to Output 3
SW 1 5
Example C— routes Input 1 to Output 5
FIGURE 10.
Matrix Switching Example