BDV Phantom 800, Руководство пользователя, Страница: 31 / 78

. . . . .
I N S T A L L A T I O N I N S T R U C T I O N S
Final System Installation
Phantom 800 User Guide Edition 1.06
25
every time a user logs on to a network. By default, the Phantom 800 is configured with a
dynamic IP address.
The type of IP address for the control computer depends upon whether the computer is
connected directly to the Phantom 800 Ethernet connector, or if it is connected via a
network:
If the computer controlling the Phantom 800 is a client assigned to a larger network, the
network administrator will need to assign the static IP address to the control computer
and Phantom 800. If the static IP address of the Phantom 800 is unknown, it can be
accessed using the RS-232
SHOWNET
command. The RS-232 controls must be used for
initial set-up of the Phantom 800 IP address, and thereafter will no longer be required.
• Web-Server GUI and RS-232 Control— This method uses a web-server GUI rather
than Telnet commands to control the Phantom 800 over a network. In this instance, the
control computer is a client on a larger network which uses DHCP to assign IP
addresses. The web-server GUI within the Phantom 800 is invoked by opening a web-
browser on the control computer (Black Diamond Video recommends Mozilla Firefox)
and entering the IP address of the Phantom 800 into the address bar of the browser.
• Web-Server GUI without RS-232 Control— With this method, a “static” IP address is
assigned to the Phantom 800 and the control computer. A web-browser (Black Diamond
Video recommends Mozilla Firefox) is opened and the static IP address of the Phantom
800 is entered into the address bar of the browser. This is the easiest method of
controlling the Phantom 800.
R S - 2 3 2 O N L Y
1 Connect the control computer to the RS-232 connector on the Phantom 800 using an
RS-232 direct-connect type cable.
2 Open up a serial port terminal on the control computer connected to the Phantom 800.
On Microsoft Windows, you can use HyperTerminal for serial communications.
3 Configure the port settings as follows:
• Baud: 9600
• Data bits: 8
• Parity: None
• Stop bits: 1
Connection Route IP Address Type
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Direct to Phantom 800 Static only
Through a network Dynamic or Static