BDV Phantom 800, Руководство пользователя, Страница: 17 / 78

Phantom 800 User Guide Edition 1.06
11
. . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
G
ETTING
R
EADY TO
I
NSTALL
3
This chapter presents on overview of the installation process. Read this chapter to get an
introduction to how to install the Phantom 800. Included is information about using DVI
converters (required if you have video sources that are not in DVI format) and Black
Diamond cable kits.
For detailed installation instructions see Chapter 4, “Installation Instructions.”
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O V E R V I E W O F T H E I N S T A L L A T I O N P R O C E S S
Installing the Phantom 800 can be divided into two phases:
System Test Installation.
Begin your installation process by performing a complete system test installation. The
purpose of this phase is to establish remote control of the Phantom 800, and verify that all
input and output channels are working. You will use a single test video input and at least
one of the display devices you plan to use in your final system installation. You will verify
that your test video input is properly displayed on the display device when routed through
each input and output channel.
Final System Installation.
Complete the installation process by doing the final system installation. In this phase, you
will install the Phantom 800 in its final location. You will establish permanent remote
control, connect all necessary input and output cabling, apply all input sources (including
any DVI converters as necessary), and connect all display devices. Finally, you will verify
that each video source is properly displayed on each display device.
IMPORTANT!
This product must be tested with the intended equipment
before being permanently installed. Failure to do so voids any
warranty and limited liability. Although Black Diamond Video
tests the product to its fullest extent, situations may arise
giving marginal results or potential compatibility issues when
used with digital video display devices that are non-compliant
or incompatible.