BDV Phantom 800, Руководство пользователя, Страница: 67 / 78

Phantom 800 User Guide Edition 1.06
61
. . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RS-232
AND
10/100T P
ROTOCOL
A
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P H A N T O M 8 0 0 C O M M A N D S E T
The Phantom 800 is controlled by using RS-232 or Ethernet connection using telnet
protocol. Commonly used commands are presented and defined in the following tables
covering switching, scaling, frame grabbing, windowing, and general system commands.
SWITCHING COMMANDS
Command Syntax Action
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BRIGHTNESS BRI <input #> <bright>
Adjusts the brightness of the input signal. RGB
and SD inputs only.
<bright>
is a value from -100 to 100.
CONTRAST CONT <input #> <contrast>
Adjusts the contrast of the input signal. RGB and
SD inputs only.
<contrast>
is a value from 0 to 200.
HUE HUE <input #> <hue>
Adjusts the hue of the input signal. SD inputs only.
<hue>
is a value from -180 to 180.
SATURATION SAT <input #> <sat>
Adjusts the saturation of the input signal. SD
inputs only.
<sat>
is a value from 0 to 200.
CREATEINPUTHOST CINHOST <slot #> <name>
<hfp> <hs> <hbp> <hact>
<vfp> <vs> <vbp> <vact>
<hfreq> <sync> <phase>
<vpol> <hpol> <interlace>
Creates an input host timing in the designated slot
number, with the specified parameters.
<name> is limited to 16 characters.
<hfreq>
in Hz.
<sync>
is 3,4, or 5 wire.
<vpol>
is vertical sync polarity; 1 = positive, 0 =
negative.
<hpol> is horizontal sync polarity.
<interlace>
is 1 = interlaced, 0 = non-
interlaced.