User’s Manual
58/73
Ver. [E.1.1]
Figure 55 Access Control Setup
1)
Host Name: Arbitrary Name (No space).
2)
Policy: Select among Input/ Output/ Forward
3)
Protocol: Select the specific protocols, for example TCP/UDP, to be
controlled. If it is configured to “All”, then all protocols are controlled.
4)
Set the range for Source and Destination IP registration information, Net
Mask, Port of Input, Output, and Forward in the “Policy”.
Source IP: 0.0.0.0 for every available IPs.
Src
NetMask:
0.0.0.0
Src Start Port and Src End Port: The specified ranges for Port
can be assigned. If no address is input, then it is for all Ports.
Destination IP: Is for WAN IP of AP.
Dest NetMask: May not need any input.
Dest Start Port and Dest End Port: May not need any input.
5)
Print: Allows user to confirm and delete the information that is configured.
13.7. Port
Forwarding
Configure the DMZ to the specific PC and the Port Forwarding to the specific Port.
