User’s Manual
15/73
Ver. [E.1.1]
Figure 10 “Internet Protocol (TCP/IP) Properties” window
7. Communication between user’s PC and the DosaLink – 540
The communication between the user’s PC and the DosaLink - 540 should be
confirmed before configuring the PC by utilizing the configuration window of the
DosaLink – 540. For this purpose the “ping” command can be used.
“Start” => “Run”, input “cmd” and press “OK”. The DOS window will be open.
Once performed “ping 192.168.1.1”, should appear as shown as Figure 11. If it
does not appear, then the sequence should be performed again after pressing
“reset”, which is located on the back of the DosaLink -540, and rebooting the
user’s PC.
