User’s Manual
27/73
Ver. [E.1.1]
“Proxy”: The Gateway IP address of device is the DNS’ IP address.
(3)
DHCP Relay Agent is the function that assigns the IP address to Local LAN or
WLAN’s Client from the DHCP Server, which connects to WAN. If it is configured,
then the requested DHCP from the Local PC transmits to the DHCP server over
the WAN. For this operation, NAT can be disabled and user should choose
“Disable” for DHCP function.
In the case of selecting “Enable”, the IP address for the DHCP should be
written into the menu as shown in Figure 25.
Figure 25 Configuration Window for “Server”
11.3. Access
Control
This menu allows users to configure the access control to terminals that connect to the
DosaLink – 540. The configuration is established on the basis of the IP
addresses that
are assigned to each terminal. This can be applied to a specific terminal for the access
control. It is able to restrict access of the output to a specific terminal from the DosaLink
