GSS3219A
Instruction Manual
9
Step 7 (Left side shelf assembly)
a) Pull out the drawer from the left side shelf (H),
then turn over it as shown.
b) String five hooks (J) with the side bar tool
hanger (I), then align the holes on the end of
side bar tool hanger (9) with the holes on the
left side shelf.
c) Insert one M6 x 15mm bolt (BB) with one M6
spring washer (FF) and one M6 washer (EE)
into each pre-drilled hole. Tighten bolts by
hand until secured.
d) Go back and tighten all bolts using the
screwdriver provided.
Step 8 (Right side shelf assembly)
a) Turn over the right side shelf (K).
b) String five hooks (J) with the side bar tool
hanger (I), then align the holes on the end of
side bar tool hanger (I) with the holes on the
right side shelf.
c) Insert one M6 x 15mm bolt (BB) with one M6
spring washer (FF) and one M6 washer (EE)
into each pre-drilled hole. Tighten bolts by
hand until secured.
d) Go back and tighten all bolts using the
screwdriver provided.
Step 9 (Assemble the body to the cart)
a) Place the body assembly (L) on the top of cart assembly.
b) Align the two holes on the left top of cart assembly with
the two holes on the left of body assembly (L).
c) Insert one bolt (BB) with one M6 spring washer (FF) and
one M6 flat washer (EE) into each pre-drilled hole.
d) Tighten bolts by hand until secured.
e) Repeat the procedure for the right assembly.
f) Go back and tighten all bolts using the screwdriver
provided.
Attention:
Unpack the regulator/hose assembly (located
underneath the firebox) prior to assembling the
grill body to the cart, and pull out the
regulator/hose to the cart side panel when go
ahead to this step.
BB
M6 x 15 Bolt
2 PCS
FF
M6 Spring Washer
2 PCS
EE
M6 Flat Washer
2 PCS
BB
M6 x 15 Bolt
2 PCS
FF
M6 Spring Washer
2 PCS
EE
M6 Flat Washer
2 PCS
BB
M6X15 Bolt
4 PCS
FF
M6 Spring Washer
4 PCS
EE
M6 Flat Washer
4 PCS
